Products from category Accessories
Category Van den Hul
Accessories
The POLARITY CHECKER
The POLARITY CHECKER helps to enhance your audio system’s resolution Description: The van den Hul POLARITY CHECKER is a unique device that will come in handy in fine-tuning your audio installation to enhance its resolving capabilities by minimizing its residual ground currents; However, it also serves as a voltage, phase and cable-interruption checker with all kinds of electrical appliances in and(...)
Accessories
The SOLUTION
“The SOLUTION” for perfect contact treatment and protection Why care for your audio contacts? The electrical audio contacts made by the interconnects in your installation represent an often overlooked vulnerable part in the audio signal path and much harm can be done to the audio signal transferred at these points. Through frequent plugging and unplugging your contacts will start to wear. Also, the(...)
Accessories
TLF Oil
Special TLF Oil: Our “The Lower Friction” (TLF) is a broad spectrum applicable super oil, especially intended to reduce bearing friction by forming an extremely stable lubrication layer between mechanical parts. It is a light type oil and is particularly suitable for close fitting - tight clearance bearings. The oil offers a superior combination of high performance properties, like for instance a(...)
Accessories
Turntable Spindle Oil
Special Turntable Spindle Oil: This high-tech oil is suitable for all non air-cushioned metal-to-metal turntable bearings and is supplied in a 20 cc bottle with brush. The oil is doped with microscopic 1 micron diameter zirconium oxide marbles which act as an extra rotating separation between the spindle and the bearing bus, and there are so many marbles that there is no direct mechanical contact(...)
Accessories
Cartridge Alignment Gauge
Our mirror-scaled Cartridge Alignment Gauge allows for a fast and accurate optimum alignment of your phono cartridge. Alignment instructions included.
Accessories
Cartridge Mounting Set
Cartridge Mounting Set, containing: A small brush, specially intended for cleaning phono tips. A small robust non-magnetic screwdriver, specially intended for cartridge mounting and alignment purposes: Dimensions: Blade/H/W/D = 3.0 / 58.5 / 6.5 / 6.5 mm. 4 non-magnetic stainless steel screws: 2 pcs. M2.5 x 5 mm 2 pcs. M2.5 x 8 mm 2 nylon washers: Øinside/Øoutside/D = 2.7 / 5.0 / 0.5 mm
Accessories
Spirit Level
Accurate small Spirit-Level intended for tonearm and platter levelling purposes. -Dimensions: H/W/D: 16/9/12.7 mm.
Accessories
Tip Saver
Tip Saver: Protects your valuable sensitive cartridge from accidental damage during idle time, storage and transport. Suitable for our The DDT - II Special, The MC - 10 Special, The MC - ONE Special, The MC - ONE Super Special, The MC - TWO Special, The FROG ®, The FROG ® Gold and The FROG ® HO moving coil phono cartridges.
